ISO INTERNATIONAL STANDARD 13539 First edition 1998-08-01 Earth-moving machinery Trenchers Definitions and commercial specifications Engins de terrassement Trancheuses Définitions et specifications commerciales ISo Reference number ISO 13539:1998(E) ISO 13539:1998(E) Foreword IsO (the International Organization for Standardization) is a worldwide federation of national standards bodies (isO member bodies). The work of preparing International Standards is normally carried out through ISO technical committees.Eachmemberbodyinterestedinasubjectforwhichatechnicalcommitteehasbeenestablishedhas liaison with IsO, also take part in the work. IsO collaborates closely with the International Electrotechnical Commission(lEC)onallmattersofelectrotechnicalstandardization. Draft International Standards adopted by the technical committees are circulated to the member bodies for voting. Subcommittee SC 4, Commercial nomenclature, classification and rating @ISO1998 All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher International Organization for Standardization Case postale 56. CH-1211 Geneve 20 Switzerland Internet iso@iso.ch Printed in Switzerland ISO 13539:1998(E) INTERNATIONAL STANDARD @ISO Earth-moving machinery Trenchers Definitions and commercial specifications 1 Scope This International Standard defines terms and specifies the content of commercial literature specifications for self- propelled trenching machines, and their equipment, as defined in clause 3. 2 Normative references The following standards contain provisions which, through reference in this text, constitute provisions of this revision, and parties to agreements based on this International Standard are encouraged to investigate the possibility of applying the most recent editions of the standards indicated below. Members of IEC and isO maintain registers of currently valid International Standards. IsO 3450:1996, Earth-moving machinery-Braking systems of rubber-tyred machines -Systems and performance requirements and test procedures. ISO 5010:1992, Earth-moving machinery — Rubber-tyred machines - Steering requirements. ISO 6014:1986, Earth-moving machineryDetermination of ground speed. IsO 6016:1998, Earth-moving machinery — Methods of measuring the masses of whole machines, their equipment and components. IsO 6165:1997, Earth-moving machinery — Basic types - Vocabulary. Iso 6746-2:1987, Earth-moving machinery Definitions of dimensions and symbols — Part 2: Equipment. Iso 7457:1997, Earth-moving machinery — Determination of turning dimensions of wheeled machines. Iso 8812:—1), Earth-moving machinery Backhoe loaders — Definitions and commercial specifications. Iso 9249:1997, Earth-moving machinery Engine test code — Net power. IsO 10265:1998, Earth-moving machinery Crawler machines — Performance requirements and test procedures for braking systems. 1) To be published.