BS EN ISO BRITISH STANDARD 2114:2000 BS 2782-4: Method 432B:2000 Incorporating Corrigendum No.1 Plastics (polyester resins) and paints and varnishes (binders) - Determination of partial acid value and total acid yalue The European Standard EN IS0 2114:2000 has the status of a British Standard ICS 83.080.10 BSi NOCOPYINGWITHOUTBSIPERMISSIONEXCEPTASPERMITTEDBYCOPYRIGHTLAW BS EN ISO 2114:2000 National foreword This British Standard is the official English language version of EN ISO 2114:2000. It is identical with ISO 2114:2000. It supersedes BS EN ISO 2114:1997 which is withdrawn. The UK participation in its preparation was entrusted to Technical Committee PRI/42, Fibre reinforced thermosetting plastics and prepegs, which has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep the UK interests informed; monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. Cross-references Attention is drawn to the fact that CEN and CENELEC Standards normally include an annex which lists normative references to international publications with their corresponding European publications. The British Standards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section entitled “International Standards Correspondence Index", or by using the “Find" facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Compliance with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN ISO title page, the EN ISO foreword page, the ISO title page, pages i to iv, pages 1 to 10, This British Standard, having the Annex ZA page and a back cover. been prepared under the The BSI copyright date displayed in this document indicates when the direction of the Sector Committee for Materials and document was last issued. Chemicals, was published under the authority of the Standards Committee and comes into effect on 15November2000 Amendments issued since publication Date Comments Amd. No. 13829 3 April 2002 Incorporating Annex ZA BSI 3 April 2002 Corrigendum No. 1 ISBN 0 580 36545 X EN ISO 2114 EUROPEANSTANDARD NORME EUROPEENNE EUROPAISCHE NORM August 2000 ICS 83.080.10 SupersedesENISO2114:1996 English version Plastics (polyester resins) and paints and varnishes (binders) Determination of partial acid value and total acid value (lsO 2114:2000) Plastiques (resines de polyesters) et peintures et vernis Kunststoffe (Polyester) und Beschichtungsstoffe (liants) - Détermination de l'indice d'acide partiel et de (Bindemittel) - Bestimmung der partiellen Saurezahl und I'indice d'acide total (ISO 2114:2000) derGesamtsaurezahl (ISO2114:2000) This European Standard was approved by CEN on 1 August 2000. CEN members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat orto any CEN member. This European Standard exists in three official versions (English, French, German).A version in any other language made by translation under the responsibility of a CEN member into its own language and notified to the Central Secretariat has the same status as the official versions. CEN members are the national standards bodies of Austria, Belgium, Czech Republic, Denmark, Finland,France, Germany, Greece, Iceland, Irelan